Short Guide On The Correct Storage Of Forklifts

The Correct Storage Of Forklifts
0 124

You will find plenty of information on what to do with forklifts when they are being operated and how to keep them running smoothly. Yet, many professionals forget that a big part of forklift maintenance is how to store them properly when they are not in use. Everyone is so concerned with getting the most out of the machines that they forget their proper storage is just as important. With over 900,000 forklifts operating in the United States alone, the material handling industry relies heavily on the proper functioning of these machines.

Without proper storage of forklifts, material handling businesses all across the United States are likely to face losses on a monumental scale that would set back the sector and the industry. After all, forklifts are sizeable investments and knowing how to use them and store them properly is a crucial part of ever manager’s training.

With so much diversity in the options available in the market, the storage requirements for every type of forklift are distinct from one another. For example, used Moffett forklifts are often bought by firms in order to improve their material handling arsenal. Yet, improper storage can lead to rusting and impaired functionality. This makes it all the more important for material handling businesses to know how to store them properly.

In this article, we shall be taking a look at why it is so important to store forklifts properly and how managers and forklift operators can go about storing them for long term. After all, not all forklifts are in use at all times and there will be instances when forklifts will need to be stored for a long period of time. It is at that time when a complete knowledge of the proper storage of the forklifts will come in handy.

How to Store Forklifts on a Daily Basis?

- Advertisement -

Before we get to discussing how to store forklifts for the long term, let us discuss a more likely case. At the end of each workday, forklift operators must shut off their forklifts and store them overnight for the next workday. In order to make sure your forklift does not rust and performs flawlessly throughout its functional life, here are a few tips on how to store it:

  • Park the forklift on dry and flat surface. If the surface is wet, then the water can damage any of the electrical components of the forklift or cause slippage when the forklift is turned on the next day. Moreover, the flat surface will make sure the forklift does not roll away from its original position.
  • Put on the parking brakes.
  • Make sure the mast is titled in the vertical position and the tires are touching the ground.
  • Do not leave the key in. Instead, turn the ignition to “off” and remove the key.
  • Release the pressure in the piping cylinders by moving the tilters back and forth for some time.

How to Store Forklifts over the Long Term

Though well built forklifts such as Moffett lift truck can endure environmental pressures considerably well, however improper storage can damage even the finest of forklifts. Here are the tips to store forklifts for long period of time:

  • The battery plug should be disconnected to prevent electrical discharge and it is advisable to store the forklift in a dark place.
  • It is important to apply anti-grease to the parts exposed to air. Though forklifts bought from trusted and reliable retailers such as Bobby Park Truck and Equipment are less likely to rust over time.
  • Cover areas where moisture may enter, particularly breather.
  • It is important to keep the entire forklift covered with a sheet or any other layer which will prevent dust from settling on it. Since dust causes damage to the exterior and the color of the forklift.
  • Lubricate all lubrication joints and points.
  • Check the Tyre pressure regularly and maintain it to the standard of pneumatic tires.
  • An important part of storage is to turn the forklift on once in a while (preferable once every week) and put it into operation state by running it. This keeps all moving parts and electrical components from fusing out or developing rust due to inactivity.

These were just some of the tips to correctly store the forklifts for a long period of time. These steps will ensure that when the forklift is ready to return to the functional state, it does so smoothly without delay and performs its functions as well as it can. Having forklifts stored properly also makes good business sense since it saves time and cost which would otherwise be incurred in repairing the forklift once it is required to return to use.

Join the Newsletter
Loading...

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More